Windows 10 Uefi Iso

1. Windows 10 Uefi Iso Usb
2. Windows 10 Iso Uefi Bootable
3. Windows 10 Uefi Iso File Download
4. Windows 10 Non Uefi Iso

Make bootable Windows ISO from installation files. NOTE: This method is applicable to Windows 10, 8.1 and 7 versions. In this guide, I will show you how you can create a bootable Windows 7/8.1/10 ISO image file from Windows installation files. Step 1: If all the installation files are in a folder on your PC, you can skip to the next step. In the case that your device is using a UEFI firmware, and you can't seem to access it during startup, then it's recommended to use the Settings option from within Windows 10. More Windows 10.

Do you need to install Windows 10 on a UEFI-based PC? If so, you can use these two tools to create a compatible USB flash drive to complete the task.

At the time of installing a fresh copy of Windows 10, you typically use a USB flash drive to launch the 'Windows Setup' wizard to continue with the installation process. However, if you have a device that has a Unified Extensible Firmware Interface (UEFI), instead of the legacy Basic Input/Output System (BIOS), it is crucial to use the correct media for the firmware type to complete the installation successfully.

On Windows 10, you can use at least two tools to create a USB bootable media. You can use the Microsoft Media Creation Tool to download the files onto a removable storage with support for both firmware types (UEFI and legacy BIOS). Or you can use Rufus, a third-party tool that makes it easy to create a flash drive to install Windows with support for UEFI.

In this Windows 10 guide, we will walk you through the steps of creating a USB flash drive that includes support for UEFI using the Microsoft Media Creation Tool and Rufus.

• How to create Windows 10 UEFI boot media with Media Creation Tool
• How to create Windows 10 UEFI boot media with Rufus

How to create Windows 10 UEFI boot media with Media Creation Tool

On Windows 10, the Media Creation Tool is the option available for creating a bootable USB media to perform an in-place upgrade or clean installation.

To create a Windows 10 USB media, connect a flash drive of at least 8GB of space, and then use these steps:

1. Open the Windows 10 download page.

2. Under the 'Create Windows 10 installation media' section, click the Download tool now button to save the file.

   © Provided by Windows Central
3. Double-click the MediaCreationToolxxxx.exe file to launch the setup.
4. Click the Accept button to agree to the applicable license terms.

5. Select the Create installation media (USB flash drive, DVD, or ISO file) for another PC option.

   © Provided by Windows Central
6. Click the Next button.

7. (Optional) Clear the Use the recommended options for this PC option.

   © Provided by Windows Central

8. Select the correct language, architecture, and edition of Windows 10 (if applicable).

   Quick tip: If you plan to install Windows on multiple computers running 32-bit and 64-bit architectures, use the 'Architecture' drop-down menu and select the Both option to create a media that will work on both systems.

9. Click the Next button.

10. Select the USB flash drive option.

    © Provided by Windows Central
11. Click the Next button

12. Select the flash drive from the list. (If you do not see the device, click the Refresh drive list option.)

    © Provided by Windows Central
13. Click the Next button.
14. Click the Finish button.

Once you complete the steps, the Media Creation Tool will download the files and will create a bootable USB flash drive that you can use to install Windows 10 on computers with support for UEFI and BIOS.

1. ExpressVPN: The best VPN available right now

Windows 10 Uefi Iso Usb

This is our top pick for anyone looking to get started with a VPN. It offers a great mix of speed, reliability, outstanding customer service, and affordability. There is a 30-day money-back guarantee, so give it a shot today.

How to create Windows 10 UEFI boot media with Rufus

If the Media Creation Tool does not work or you do not want to use it, then you can try Rufus, a popular free third-party tool that allows you to create an installation media with support for UEFI devices. The utility offers two ways to make the installation media, including using an existing ISO file or downloading the image from the Microsoft servers directly from the app.

Create install flash drive with Windows 10 ISO

To create a USB media with an existing Windows 10 ISO file, connect a flash drive of at least 8GB of space, and use these steps:

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release (first link) and save the file.

   © Provided by Windows Central
3. Double-click the Rufus-x.xx.exe file to launch the tool.
4. Under the 'Device' section, select the USB flash drive.
5. Under the 'Boot selection' section, click the Select button on the right side.
6. Select the Windows 10 ISO file from the folder location.
7. Click the Open button.
8. Use the 'Image option' drop-down menu and select the Standard Windows installation option.
9. Use the 'Partition scheme' drop-down menu and select the GPT option.

10. Use the 'Target system' drop-down menu and select the UEFI (non CSM) option.

    © Provided by Windows Central

11. Under the 'Show Advanced drive properties' section do not change the default settings (unless you know what you are doing).

    © Provided by Windows Central

12. Under the 'Volume label' field, confirm a name for the drive — for example, 'win10_21h1_usb.'

    © Provided by Windows Central
13. In the 'File system' and 'Cluster size' options do not change the default settings.
14. Click the Show advanced format options button.
15. Check the Quick format option.
16. Check the Create extended label and icon files option.
17. Click the Start button.
18. Click the OK button to confirm.
19. Click the Close button.

After you complete the steps, Rufus will create a USB flash drive to install Windows 10 on a device using UEFI.

Create boot flash drive downloading Windows 10 ISO

The tool also has a feature to download the Windows 10 ISO file, which you can then use to create a USB flash drive to install Windows 10.

To create an install media with UEFI support with Rufus, use these steps:

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release (first link) of the tool to save the file.

   © Provided by Windows Central
3. Double-click the Rufus-x.xx.exe file to launch the tool.

4. Click the Settings button at the bottom of the page.

   © Provided by Windows Central

5. Under the 'Settings' section, use the 'Check for updates' drop-down menu and select the Daily option.

   © Provided by Windows Central
6. Click the Close button.
7. Close the Rufus tool.
8. Double-click the Rufus-x.xx.exe file to reopen the utility.
9. Under the 'Device' section, select the USB flash drive from the list.

10. Under the 'Boot selection' section, click the arrow button next to the 'Select' option and choose the Download option.

    © Provided by Windows Central
11. Click the Download button.
12. Use the 'Version' drop-down menu and select the Windows 10 option.
13. Click the Continue button.
14. Select the 21H1 (Build 19043.xxx - xxxx.xx) option to download the Windows 10 May 2021 Update.
15. Click the Continue button.
16. Use the 'Edition' drop-down menu and select the Windows 10 Home/Pro option.
17. Click the Continue button.

18. Use the 'Language' drop-down menu and select your installation language.

    Quick note: If you are located in the United States, select the 'English' option. Otherwise, select the 'English International' option or the language that applies to you.

19. Click the Continue button.

20. Use the 'Architecture' drop-down menu and select the 32-bit or 64-bit option (recommended).

    Quick tip: You can check the architecture of your computer on Settings >System >About, and under the Device specifications section, confirm whether the 'System type' is 64-bit or 32-bit.

21. Click the Download button.

    © Provided by Windows Central
22. Select a folder to save the ISO file.
23. Click the Save button.
24. Use the 'Image option' drop-down menu and select the Standard Windows installation option.
25. Use the 'Partition scheme' drop-down menu and select the GPT option.

26. Use the 'Target system' drop-down menu and select the UEFI (non CSM) option.

    © Provided by Windows Central
27. Under the 'Show Advanced drive properties' section, do not change the default settings.
28. Under the 'Volume label' field, confirm a name for the bootable drive — for example, 'win10_21h1_usb.'
29. Under the 'File system' and 'Cluster size' sections, do not change the default settings.
30. Click the Show advanced format options button.
31. Check the Quick format option.
32. Check the Create extended label and icon files option.
33. Click the Start button.
34. Click the OK button.
35. Click the Close button.

Once you complete the steps, Rufus will run the automated script to download the Windows 10 ISO file from the Microsoft servers. Then you can use the tool to create a bootable media to install Windows 10 on a UEFI device without the need for the Media Creation Tool.

When you have the USB boot media with support for UEFI systems, you can use it to launch the 'Windows Setup' wizard to perform a clean installation of Windows 10 or an in-place upgrade. However, since the 'UEFI:NTFS bootloader' does not include a digital signature for secure boot, you must temporarily disable secure boot on the motherboard firmware before you can boot into the setup. Typically, you would complete this task from within the Unified Extensible Firmware Interface, which you can access by hitting one of the function keys (F1, F2, F3, F10, or F12), Esc, or delete key as soon as you start the computer.

The firmware settings are different per manufacturer and even by device model. As a result, make sure to check your device manufacturer's support website for more specific instructions. After the installation of Windows 10, you can enable secure boot again.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

Summary :

What is UEFI boot mode? How to create a UEFI bootable USB? How do I boot from USB in UEFI mode? If you are also troubled by these questions, this post of MiniTool is what you need. It will provide you with detailed steps and clear screenshots.

About UEFI Boot

Why do so many people want to create a UEFI boot USB? In order to create a UEFI bootable USB successfully, it is necessary to figure out the following 2 questions first.

What Is UEFI

UEFI (Unified Extensible Firmware Interface) is known as a motherboard firmware interface for computers. It serves as a “middleman” between your computer’s firmware and the operating system. With UEFI boot mode, your computer can initialize the hardware components and boot the OS stored on the hard disk.

In recent years, UEFI boot mode seems to be the successor to the BIOS. More and more users tend to boot their computer in UEFI mode. This is because the UEFI mode breaks many limitations of BIOS mode, including the restrictions on the size of hard drive, booting process, number of partitions, and security.

In a word, UEFI boasts more advanced features compared with BIOS. Here we summarize them as follows:

• UEFI allows users to handle a storage device that is larger than 2TB, while the old legacy BIOS cannot handle so large d
• With UEFI boot mode, you can create more than 4 primary partitions on a GPT disk.
• UEFI supports secure startup. It is capable of checking the validity of the operating system to prevent malware from tampering the startup process.
• UEFI firmware supports various optimization and enhancement, which can help your system boot more quickly than it could before.
• UEFI supports both 32-bit and 64-bit architectures, which helps the computer use more RAM to handle a more complicated process than BIOS.
• Under the UEFI mode, the computer supports networking function that can help remote troubleshooting and UEFI configuration.
• UEFI has much more setup menus and simpler graphical user interface than legacy BIOS.

What Support UEFI Boot Mode

UEFI has lots of advantages over BIOS, but not all computers and devices are supported. In order to boot from USB in UEFI mode successfully, the hardware on your hard disk must support UEFI. One of the most important things is to make sure that your system disk is GPT form. If not, you have to convert MBR to GPT disk first.

If your hardware doesn’t support the UEFI firmware, you need to purchase a new one that supports and includes UEFI.

Now, you may have an overall understanding of UEFI boot mode. Let’s see how to create a Windows 10 UEFI boot stick. Please keep reading the following part carefully.

How to Create a UEFI Bootable USB

How to create a UEFI boot USB? Before starting the following steps, you need to prepare a USB flash drive with 8GB space at least.

Method 1. Use Windows Media Creation Tool

Windows Media Creation Tool is one of the most common ways to create a bootable USB drive. Similarly, you can use it to create a UEFI boot USB.

Tip: This method is suitable for those computers that are using UEFI firmware. To create a UEFI boot USB, you can perform a clean installation or in-place upgrade of the OS.

Now, let’s see how to create a Windows 10 UEFI USB via Windows Media Creation Tool.

Step 1. Make sure the USB flash drive is connected to your computer.

Step 2. Click here to download the Windows Media Creation Tool from Microsoft's official website and save it on your computer.

Step 3. Run this program as an administrator and click on Accept to agree with the license terms.

Step 4. In the pop-up window, click the second option Create installation media USB flash drive, DVD, or ISO file) for another PC and click on the Next button.

Step 5. Then check the box Use the recommended options for this PC and click on Next to go on, which will automatically select the language, edition, and architecture that match with your computer.

Step 6. Select the USB flash drive option and click on Next to go on.

Step 7. Then select the USB flash drive from the Removable drives list and click on Next to go on. If you don’t find the USB drive, click on the Refresh drive list option.

Step 8. Now, this tool will download the latest Windows 10 installation files that you select above on your device. Once the download is completed, click on Next to start creating the Windows 10 bootable USB.

Step 9. Once you see the screen Your USB flash drive is ready, click on the Finish button.

Now, the Windows 10 UEFI boot stick has been created. You can use it to boot your computer and install Windows 10.

In addition to using the tool of Microsoft, here are another 2 effective utilities that can help you create a UEFI boot USB.

Method 2. Use Rufus

Rufus is an open-source program that can create a UEFI bootable USB by using an existing ISO file. Connect your USB flash drive to the computer and then follow the steps below:

Step 1. Click here to download Rufus and install the program on your PC.

Step 2. Launch this program to open its main interface, and then select the USB flash drive from the Device menu.

Step 3. Click on the Select button under the Boot selection tab, and then select the Windows 10 ISO file from its folder path.

Step 4. Select the Standard Windows installation option from the Image option drop-down menu.

Step 5. Select the GPT option from the Partition scheme drop-down menu.

Step 6. Select the UEFI (non-CSM) option from the Target system drop-down menu

Step 7. Then you can click on Show advanced drive properties section and keep the default settings.

Step 8. Enter a name for the USB drive in the Volume label field, and then you can select a File system and cluster size from the drop-down menu.

Step 9. After the Format Options are confirmed, click on the Start button.

Step 10. Click on the OK button to confirm this process and click the Close button.

After finishing the above steps, this tool will create a UEFI bootable USB drive automatically.

Method 3. Use MiniTool Partition Wizard

MiniTool Partition Wizard is another effective tool that can help you create a UEFI boot stick. It is a reliable partition manager that boasts many powerful features such as resize partition, convert FAT to NTFS without data loss, convert MBR to GPT disk, migrate OS to SSD, etc.

As mentioned above, the UEFI mode requires a GPT disk. If your USB is the MBR partition table, you need to convert it to GPT first. MiniTool Partition Wizard can help you convert MBR to GPT without data loss. It is very simple to operate. Here’s how:

Step 1. Connect the USB flash drive to your computer and launch this program to get its main interface.

Step 2. Select the USB drive and click on Convert MBR Disk to GPT Disk feature from the left pane.

Step 3. Click on Apply to execute the pending operation.

After your USB flash drive is converted to GPT, you can move your Windows 10 to this drive. To do so, continue the following steps.

Windows 10 Iso Uefi Bootable

Step 1. In the main interface, select the Migrate OS to SSD/HD Wizard feature from the left pane.

Step 2. Select Option B to copy the system required partitions only and click on Next to go on.

Step 3. Select the USB drive and click on Next. Then you will see a warning message saying that all the data on the target disk will be destroyed. Click on Yes to confirm this operation.

Step 4. Select a copy option based on your needs and click on Next to continue.

Step 5. Click on the Finish button. At last, click on Apply to execute the pending operations.

After that, Windows 10 will be migrated to the USB drive. You can set the USB as the first boot order and use it to boot your computer.

Now, another question comes into being. How do I boot from USB in UEFI mode? Please keep reading the following part.

How Do I Boot From USB in UEFI Mode

In this part, we mainly focus on how to boot from USB in UEFI mode. You need to enable the UEFI mode first and then use the UEFI boot USB to start your computer.

Step 1. Power on your computer, and then press the F2 keys or other function keys (F1, F3, F10, or F12) and the ESC or Delete keys to open the Setup utility window.

Step 2. Navigate to the Boot tab by pressing the right arrow key.

Step 3. Select the UEFI/BIOS Boot Mode, and press Enter.

Step 4. In the pop-up window, select the UEFI Boot Mode by pressing the up and down arrow keys, and then press Enter.

Step 5. Press the F10 key and Enter to save the change and exit the window. Here the key depends on your specific computer manufacturer. After that, you can try using the bootable USB to start your computer in UEFI mode.

Wrapping Up

How to create a UEFI bootable USB on Windows 10? Now, I believe that you already have known the answer. Bear in mind that you need to make sure the drive is GPT partition table so that you can use it to boot your computer in UEFI mode successfully.

If you have any questions about this software, you can send us an e-mail via [email protected]. We also appreciate any ideas about this topic in the comment area.

UEFI Boot USB FAQ

Windows 10 Uefi Iso File Download

To enable the UEFI boot mode, you need to access the BIOS Setup utility and then operate further. Here’s how:

Windows 10 Non Uefi Iso

1. Press F10 and ESC (or Delete) keys when booting your computer to open the BIOS Setup utility.
2. Go to the Boot tab and select the UEFI/BIOS Boot Mode by using the arrow keys, and press Enter.
3. Select the UEFI Boot Mode by pressing the up and down arrow keys and press Enter.
4. Press F10 keys to save the changes.

You need to prepare a Windows 10 bootable USB and follow the steps:

1. Connect the USB drive to your computer.
2. Press the appropriate key to enter the BIOS menu.
3. Select the USB drive as the first boot order and save the change.
4. Restart your computer.